An optical sensor enables automatic consecutive detection of crop marks throughout the nested image which the Inkjet printer prints, in combination with the automatic adjustment function to obtain precise contour cutting. By continuously detecting a maximum of 4 points, nested images in both X and Y axis can be cut aligning each image automatically. With the original half cut function, the backing sheet can be cut leaving a little bit of half cut connecting points,which can be easily detached when necessary.Various media without backing sheets can be also cut. Media is automatically cut by a standard sheet cutter.
Selectable clamp pressure with high and low setting ensures accurate cutting of various media.
Selectable three jog speeds ensure proper and easy positioning of the head to the point.
Over-cut function makes the starting and ending points overlapped, which eliminates uncut portion of the media.
Media can be loaded from back or front.
Up to 6 roll media can be set at a time(1 set standard).
Plug-in cutting software for CorelDRAW and Illustrator is included.
A special adaptor to use commercially available pens and USB interface are included.
|Acceptable sheet width||90 ~ 1040 mm||90 ~ 1580 mm||90 ~ 1880 mm|
|Acceptable roll sheet||Outer less than ö200 mm|
|Acceptable roll weight||< 18 kg||< 18 kg||< 20 kg|
|Effective cutting area *1||760 mm x 51 m||1300 mm x 51 m||1600 mm x 51 m|
|Maximum auto cutting width *2||870 mm||1425 mm||1720 mm|
|Maximum cutting speed||100 cm/s|
|Maximum moving speed||140 cm/s|
|Adjustable speed range *3||1-10 cm/s : 1 cm step adjustment|
10-50 cm/s : 5 cm step adjustment
50-100 cm/s : 10 cm step adjustment
|Mechanical resolution||5 µm|
|Command resolution||25 µm or 10 µm MGL-IIc|
|Repeatability||±0.2mm (Excluding shrinkage/expansion caused by the film temperature)|
|Pen pressure||400 gm|
|Range of down pressure||Cutter: 10~20g (2g step), 20~100g (5g step), 100~400g (10g step)|
Pouncing: 10~20g (2g step), 20~100g (5g step), 100~400g (10g step)
Pen 10~20g (2g step), 20~100g (5g step), 100~150g (10g step)
|Acceptable sheet *4||Vinyl up to 0.25 mm thickness, Fluorescent type vinyl Reflective sheet|
|Acceptable sheet for pouncing *5||Paper thickness: 0.06 ~ 0.13 mm|
|Applicable tools *6||Cutter, Water based ball-point pen, Oil based ball-point pen, Pouncing tool|
|Receiver buffer size||30 MB Standard (20 MB when in sorting)|
|Operational conditions||5 ~ 35 °C / 35 ~ 75% Rh (Non-condensation)|
|Power rating||AC 100V ~ 240V|
|Power consumption||130 VA or less|
|Dimensions||1285 x 700 x 1217 mm||1825 x 700 x 1217 mm||2125 x 700 x 1217 mm|
|Weight||50 kg||60 kg||69 kg|
|*1||Maximum sheet feeding length differs depending on the software.|
|*2||Sheet width to cut off from the roll.|
|*3||Restricted sheet width.|
Provided that the blades specific to fluorescent type vinyl (SPB-0007) and reflective sheet (SPB-0006) are used.
|*5||Pouncing tool intended specifically for pouncing shall be used.|
|*6||The goods on the market are f8~f9 Pen. No guaranty with accuracy, and image quality.|